Mitsubishi Ecodan Review: Costs, Efficiency and UK Track Record

The Mitsubishi Ecodan is one of the longest-established air source heat pumps in the United Kingdom: Mitsubishi Electric launched the range here in the late 2000s, and UK installers fit it widely. If you are searching for a mitsubishi ecodan review, this article covers what the current range costs, its published efficiency figures, how it copes with cold weather, its warranty options and where it falls short.

Is the Mitsubishi Ecodan Worth Buying?

Yes, for most UK homes. The Mitsubishi Ecodan has been on sale in the UK since the late 2000s, so installers and engineers know it well. The current range delivers a seasonal COP of 3.2–3.8, costs £9,000–£13,000 installed before the £7,500 BUS grant, and has a large UK installer network.

The Ecodan’s greatest strength is its maturity — engineers know these systems inside out, and troubleshooting support is excellent. The MELCloud app provides remote monitoring, and the FTC6 controller offers comprehensive weather compensation settings. On the downside, the current R32 models are slightly less efficient than the latest R290 competitors from Vaillant and Samsung, and Mitsubishi has been slower to launch its next-generation natural refrigerant range. For homeowners who value proven reliability above all else, the Ecodan is still the benchmark.

Mitsubishi Ecodan Range Overview

Mitsubishi Electric offers several Ecodan models tailored to different UK property types. The core range includes the standard Ecodan, the Ultra Quiet PUZ-WZ series, and the Ecodan Monobloc. All current models use R32 refrigerant, replacing the older R410A used in earlier generations.

The range spans capacities from 5kW to 14kW, covering everything from well-insulated new builds to larger detached properties. The split system models (where refrigerant lines run between the outdoor and indoor units) remain the most popular, though the newer monobloc option simplifies installation by keeping all refrigerant outdoors.

Real-World SCOP Data and Efficiency Performance

Mitsubishi quotes ErP efficiency ratings of A+++ for the Ecodan range, with laboratory COP figures up to 4.80 at A7/W35. In real UK installations, the seasonal COP typically falls between 3.0 and 3.8, which aligns with data from the Energy Saving Trust’s field trials and the Electrification of Heat Demonstration Project.

The Ecodan’s performance is heavily influenced by flow temperature settings. At 35C flow temperature with underfloor heating, SCOP figures of 3.5-3.8 are consistently achievable. At 50C flow temperature with standard radiators, expect 2.8-3.2. This reinforces the importance of correct system design and, where possible, running at the lowest flow temperature your heat emitters can support.

One genuine strength of the Ecodan is its cold-weather performance. The unit is rated to operate down to -25C, and the compressor technology maintains reasonable efficiency even at -15C. In UK winters, where temperatures rarely drop below -10C, the Ecodan performs reliably throughout the heating season without the sharp efficiency drops some cheaper units experience.

The Ultra Quiet PUZ-WZ: Best Ecodan for Noise-Sensitive Locations

The Ultra Quiet PUZ-WZ model was specifically designed for UK properties where noise limits are a concern. It produces just 45dB at 1 metre, which drops to approximately 33dB at 3 metres. In England, the installer’s MCS 020 a) sound calculation has to show the unit stays within the 37dB permitted development limit, measured 1 metre from the window or door of a neighbour’s habitable room, so even this model needs careful siting in many semi-detached and terraced house installations.

The quiet operation is achieved through an advanced fan blade design, vibration-damping mounts, and a sound-insulated compressor compartment. Mitsubishi also offers a night mode that further reduces noise output, making this model suitable for installations near bedrooms or in tightly spaced housing developments.

The trade-off is a slightly limited capacity range of 5kW to 8.5kW, which means larger properties requiring more than 8.5kW of heat output will need to look at the standard PUZ-HWR models or consider a different brand entirely. For the typical 2-4 bedroom UK home, however, the Ultra Quiet model is often perfectly adequate.

Mitsubishi Ecodan Installed Costs in the UK

The Ecodan is competitively priced within the premium heat pump segment. Fully installed costs for a typical UK home range from £10,000 to £13,000, including the outdoor unit, hot water cylinder, controls, and installation labour. The Ultra Quiet models sit at the upper end of this range due to their more sophisticated acoustic engineering.

With the £7,500 Boiler Upgrade Scheme grant, the net cost drops to approximately £2,500-£5,500. This makes the Ecodan one of the most accessible premium heat pumps on the market, and its wide installer network means competitive quotes are readily available across the UK.

Mitsubishi’s installer network is the largest of any heat pump brand in Britain, with over 3,000 accredited installers. This means shorter wait times for installation, easier access to servicing, and more competitive pricing due to greater competition between installers. Request a free quote: up to three approved installers who cover your area may contact you, and you can ask each one to price an Ecodan.

Reliability and Long-Term Track Record

This is where the mitsubishi ecodan review story gets particularly strong. Mitsubishi Electric launched the Ecodan in the UK in the late 2000s, so it has one of the longest UK track records of any air source heat pump, and installers and engineers know the system well.

The most common issues reported over the years include:

• Flow sensor failures (typically after 5-8 years, relatively inexpensive to replace)
• PCB board issues on early R410A models (largely resolved in current R32 units)
• Expansion vessel pressure loss (a routine maintenance item)
• Defrost cycle inefficiency in early software versions (resolved through firmware updates)

Most of these are routine service items rather than signs of a design flaw, and spare parts are easy to get because so many Ecodan units have been fitted in the UK.

Warranty Options and Servicing Requirements

Mitsubishi offers a standard 5-year parts and labour warranty on the Ecodan range when installed by an accredited installer. Extended warranties of 7 and 10 years are available through certain installer programmes, though these often require annual servicing to remain valid.

Annual servicing costs run to approximately £100-£180, covering checks on refrigerant pressures, electrical connections, water system pressures, control settings, and general component inspection. Mitsubishi recommends annual servicing but does not void the standard warranty if a service is missed, which is more lenient than some competitors.

The MELCloud app provides basic monitoring and control, including heating schedules, hot water timing, and energy consumption data. It is functional rather than feature-rich, and lacks the depth of energy analytics offered by the Daikin Onecta or Vaillant myVaillant platforms.

Who Should Choose the Mitsubishi Ecodan?

The Ecodan is the safe choice for UK homeowners who value proven reliability and easy access to installers and servicing. It is particularly well-suited to:

• Semi-detached and terraced homes where the Ultra Quiet model solves noise concerns
• Homeowners who want the widest choice of installers and the most competitive quotes
• Properties in rural areas where finding a brand-specific installer for Vaillant or Daikin may be harder
• Risk-averse buyers who want a product with a 15-year UK track record

The Ecodan is less ideal if you need flow temperatures above 60C for existing radiators, as the Vaillant (75C) and Daikin HT (70C) models offer higher output. It also uses R32 refrigerant rather than the more environmentally friendly R290, which may matter to buyers prioritising the lowest possible environmental impact.

For the best overall system efficiency, consider pairing your Ecodan with home insulation upgrades to reduce heat demand, and solar panels to offset electricity costs. A well-insulated home with solar generation can see annual heating costs as low as £400-£600 with an Ecodan system.

Ecodan Running Costs Compared to Gas Boilers

At an SCOP of 3.2 and electricity prices of 26.32p/kWh (Ofgem’s price cap for October to December 2026), an Ecodan costs approximately 8.2p per kWh of heat delivered. A modern gas boiler at 92% efficiency and gas prices of 7.97p/kWh costs approximately 8.7p per kWh of heat. The running costs are currently very close, with the heat pump marginally cheaper per unit of heat.

However, gas prices are widely expected to rise faster than electricity prices over the coming decade, particularly as carbon levies shift from electricity to gas. Homes with solar panels already see the economics tip firmly in the heat pump’s favour, and time-of-use electricity tariffs like Octopus Agile can further reduce heat pump running costs by 20-40%.

Over the 20-year lifespan of an Ecodan, total heating costs are projected to be £3,000-£8,000 lower than a gas boiler replacement, even before accounting for the BUS grant that reduces the upfront cost. The financial case strengthens further when combined with other energy efficiency measures.

Frequently Asked Questions

How long does a Mitsubishi Ecodan last?

Air source heat pumps are generally expected to last 15-20 years with proper maintenance, and there is no reason to expect less from an Ecodan. The compressor is the most critical component and typically lasts the full lifespan, while smaller components like flow sensors may need replacement around the 8-10 year mark.

Is the Mitsubishi Ecodan noisy?

The Ultra Quiet PUZ-WZ model is one of the quietest heat pumps available at 45dB at 1 metre (approximately 33dB at 3m). The standard models are louder at 49-55dB at 1 metre. For noise-sensitive locations such as terraced houses or flats, the Ultra Quiet model is the recommended choice.

Can the Ecodan work with my existing radiators?

At flow temperatures of 50-60C, many existing radiators will provide adequate heat output. However, radiators sized for a gas boiler at 70-80C may need to be upsized by 1.5-2x for optimal heat pump performance. A proper heat loss survey will determine exactly what is needed for your property.

Does the Mitsubishi Ecodan qualify for the BUS grant?

Yes. All current Ecodan models are MCS-certified and eligible for the £7,500 Boiler Upgrade Scheme grant. Your MCS-certified installer applies for the grant on your behalf, and it is deducted from your installation cost. Request a free quote to see your net cost after the grant.

Which Ecodan model is best for a 3-bedroom semi-detached house?

For a typical 3-bedroom semi, the Ultra Quiet PUZ-WZ 6kW or 8.5kW model is usually the best fit. It provides sufficient capacity for the heat demand, can meet England’s 37dB noise limit for properties with shared boundaries if it is carefully positioned, and qualifies for the full BUS grant. A heat loss calculation will confirm the exact capacity required.